Luminous word is one of the most widely used advertising methods in stores. About luminous words, in daily use, it is inevitable that there will be scratches or slight scratches in the process of transportation. If a set of luminous words is produced again, it is quite worthwhile, and it is also a comparative waste. Let's talk about how to deal with the tiny scars of luminous words.
1. Large area of scratch or transportation process, or improper operation in the construction process, resulting in word damage, is generally required to re manufacture the word panel. Make the front buckle on the bottom shell. There is no need to do special treatment for ordinary small scratches or small scratches that we can't see without careful observation.
2. As for the treatment of some slight scratches or less obvious damages on the surface of blister, it is common to use sandpaper for fine grinding. When grinding, the sandpaper should move in a circle, and the fineness of copper type sandpaper should be gradually increased to more than 600 mesh, and then the toothpaste can be used to rub.
3. Luminous word device, which has a certain height, is usually on the head of 3 meters door, or the second floor and other roof. There is no obvious need to repair the scratch. Due to the use of sandpaper in the repair operation, the engineering needs to be careful, as well as grasp the strength, angle, so as not to form damage to other parts.
The above is about the luminous word scratch processing method related content, I hope to help you.